Loading ...
Loading ...
Loading ...
−
−−
The skip (seek)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side ( or
) of the SKIP bar, then release
it. You can also activate the skip
function (SEEK is displayed on the
screen) by pushing the interface
selector to the right or left.
The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN/A.SEL bar, then release it.
To scan with the interface dial, push
the selector down, and then push it
to the right. You will see SCAN
flashing on the screen.
Use the TUNE bar to tune
the radio to a desired frequency.
Press the right side of the bar to
tune to a higher frequency, or the
left side to tune to a lower frequency.
To tune with the interface dial, push
the selector down, and turn the knob
to TUNE icon. Then press ENTER
on the selector, and turn the knob to
the desired frequency. To exit the
TUNE mode, press ENTER on the
selector, then push the selector up.
SKIP (SEEK)
SCANTUNE
Playing the FM/AM Radio (Models with navigation system)
182
SCAN ICON
TUNE ICON
Table of Contents
Loading ...
Loading ...
Loading ...