Loading ...
Loading ...
Loading ...
INSTALLATION REQUIREMENTS
Yourairconditionerwillinstallintostandarddoublehung
windowswithactualclearopeningwidthsof27to39 inches
(686turnto990ram)(FIG. 1).
Lower sash must open sufficiently to allow a clear
vertical opening of 16 inches (406mm). Side louvers
and the rear of the air conditioner must have clear .
air space to allow enough airflow through the
condenser for heat removal. The rear of the unit
must be outdoors, not inside a building or garage.
n i Sash
27"tO39"
16"rain.Innersill Window
[_; _ Extedor
Interiorwall '-.J _.o" FIG, 1
ELECTRICAL SERVICE
Check your available electrical service. The power
supply available must be the same as that shown
on the unit nameplate (foundonrightsideof cabinet).
All models are equipped with a 3-prong service plug
to provide proper service and safe positive
grounding. Do not change plug inany way. Do not
use an adapter plug. If your present wall outlet does
not match your plug, call a qualified electrician to
make the necessary corrections.
SAVE CARTON and this OWNER'S MANUAL for
future reference. The carton is the best way to store
unit during winter or when not in use.
INSTALLATION HARDWARE
FIG. 2
ITEM NAME OF PARTS Q'TY
A SIDE CURTAIN 2
B SILL SUPPORT 2
C BOLT 2
D LOCK NUT 2
E SCREW: 25/64" 13
F SCREW: 5/8" 3
G SCREW: 5/8" 5
H FOAM SEAL 1
I FOAM STRIP 1
J L BRACKET 1
K DRAIN PIPE 1
REQUIRED TOOLS:To avoid risk ofpersonalinjury, properly damage,
or product damagedue to theweightofthis
device and sharp edgesthat may be exposed:
Airconditioners coveredinthis manualposean
excessive weight hazard. Two or more people
are needed to move and install the unit.
To prevent injuryor strain, use properlifting and
carrying techniques whenmoving unit.
Carefully inspect locationwhereair conditioner
will be installed.Be sure it willsupport the
weight of the unit overan extendedperiod of
time.
Handleair conditioner with care. Wear
protective gloves whenever lifting or carrying the
unit. AVOID the sharp metalfins offront and
rear coils.
Makesure airconditionerdoes notfall during
installation.
Tight Fitting gloves
Standard screwdriver
Phillips screwdriver
Pliers
Sharp knife
3/8-inch open end wrench or adjustable wrench
1/4-inch hex socket and ratchet
Tape measure
Electric drill
1/4-inch drill bit
-5-
Loading ...
Loading ...
Loading ...