Loading ...
Loading ...
Loading ...
16
12. Remove the foodstuffs from the
processing bowl using the spatula
provided. Unlock the bowl
from the motor base to remove
foodstuffs if required.
13. Clean the processing bowl,
lid, removable feed chute,
stainless steel blades, food pusher
and spatula as per the Care,
Cleaning and Storage instructions
on page 24.
NOTE: If the ingredients stick
to the sides of the processing
bowl during processing, turn
the Speed Control Dial to the
‘OFF’ position, switch off at the
power outlet, ensure the blade
has fully stopped rotating
before removing the lid and
then push the food back onto
the blades using the spatula to
scrape down the sides of the
bowl. Replace the lid, turn the
power on at the power outlet
and recommence processing.
NOTE: The Power Drive Direct
Food Processor is designed so
that the motor will not operate
without the processing bowl
and lid correctly locked into
position. In the event that the
appliance starts without the lid
correctly locked into position,
immediately disconnect at the
power outlet and return to your
local Kambrook Service Centre
for examination.
Disassembling the Food
Processor Lid
1. Remove food pusher from inside
the removable feed chute.
2. Pull the removable feed chute
out of the lid so that is disengages
from the groove on the lid handle.
The removable feed chute is now
ready for cleaning.
3. With one hand holding the
processing bowl handle and the
other on the lid handle, turn the
lid handle clockwise (See Fig.
13). Pull the lid away from the
processing bowl to remove.
Fig.13
Assembly and Operation of Your Kambrook
Food Processor Continued...
Loading ...
Loading ...
Loading ...