Loading ...
Loading ...
Loading ...
17
Options Can be
selected with
What it does Added time
to cycle
Added
Water*
Gallons
(Liters)
TurboZone
®
Directs water into your casserole or other dishes to
eliminate the need for soaking and scrubbing of
dirty, baked on food soils. For your toughest items,
use the TurboZone
®
option with the Pots & Pans
cycle. See loading information.
SmartWash
®
H
E
Pots & Pans
Normal Wash
Directs all of the
cleaning power of
the dishwasher to
the TurboZone
®
area
during certain times
in the wash cycle
0:10 to 2:20 0.0 - 5.0
(0.0 - 18.9)
High Temp
Raises main wash temperature to improve cleaning
for loads containing tough, baked-on food.
SmartWash
®
H
E
Pots & Pans
Normal Wash
Raises the main
wash temperature
to 135°F (57°C).
0:00 to 0:30 0.0 - 2.3
(0 - 8.8)
Sani Rinse
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certied residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements of the NSF/
ANSI 184 performance standard for soil removal
and for sanitization ecacy. There is no intention,
either directly or indirectly, that all cycles on a
NSF/ANSI 184 certied dishwasher meet the NSF/
ANSI 184 performance standard for soil removal
and for sanitization ecacy.
At end of the cycle, the sanitized indicator or word
“sanitized”, on some models, will glow. If your load
did not properly sanitize, the indicator will ash at
the end of the cycle. This can happen if the cycle
is interrupted, or if the water does not reach the
required temperature. The light goes o when you
open and close the door or press CANCEL.
SmartWash
®
H
E
Pots & Pans
Normal Wash
Raises the main
wash temperature
to 135°F (57°C)
and the nal rinse
temperature to
156°F (69°C).
0:10 to 2:20 1.2 - 6.2
(4.8 - 23.3)
Turbo Heat Dry
Turns the heat element on after the wash portion
of the cycle is over. Use rinse aid with or without
the Turbo Heat Dry option for best drying results.
Plastic items are less likely to deform when loaded
in the top dish rack.
Available with
any cycle except
Quick Rinse
Turns the heat
element on at the
end of the wash
portion of the cycle.
0:11 to 0:46 0
*The maximum additional water used for any combination of options is 4.8 gal (18.2 L).
Dishwasher Control Section
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator is lit, all buttons
are disabled. The dishwasher door can still be opened or closed while the controls are locked.
To turn on the Lock:
Press and hold CONTROL LOCK for 3 seconds. The Control Lock indicator will light up. If you press any pad while your
dishwasher is locked, the light ashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock:
Press and hold CONTROL LOCK for 3 seconds. The light turns o.
Loading ...
Loading ...
Loading ...