DLG2102W User Manual

Loading ...

Problem Possible Causes Solutions

Dryer does not heat

• Housefuseisblown,circuit

breaker has tripped, or

power outage has occurred.

• Gassupplyorserviceturned

off (gas models only).

• Resetcircuitbreakerorreplacefuse.Donot

increase fuse capacity. If the problem is a

circuit overload, have it corrected by a qualiﬁed

electrician.

• Conrmthatthehousegasshutoffandthedryer

gas shutoff are both fully open.

BEFORE CALLING FOR SERVICE

Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an

early stage. If your dryer does not function properly or does not function at all, check the following before

you call for service.

Dryer will not

turn on

• Powercordisnotproperly

plugged in.

• Housefuseisblown,circuit

breaker has tripped, or

power outage has occurred.

•Makesurethattheplugispluggedsecurelyintoa

grounded outlet matching the dryer’s rating plate.

• Resetcircuitbreakerorreplacefuse.Donotincrease

fuse capacity. If the problem is a circuit overload,

have it corrected by a qualiﬁed electrician.

Greasy or dirty spots

on clothes

• Fabricsoftenerused

incorrectly.

• Cleananddirtyclothesbeing

dried together.

• Cleananddirtyclothesbeing

dried together.

• Conrmandfollowtheinstructionsprovidedwith

your fabric softener.

• Makesuretouseyourdryertodryonlyclean

items, because dirty items can soil clean clothes

placed in the same or subsequent loads.

• Stainsondriedclothesareactuallystainsthat

weren’t removed during the washing process.

Make sure that clothes are being completely

cleaned according to the instructions for your

washer and detergent.

Display shows error

code tE1 or tE2

• Thermistorismalfunctioning.

• Turnoffthedryerandcallforservice.

Lint on clothes

• Lintlternotcleaned

properly.

• Laundrynotsortedproperly.

• Excessstaticinclothes.

• Dryerisoverloaded.

• Tissue,paper,etc.,left

in pockets.

• Makesurethelintlteriscleanedbeforeevery

load. With some loads that produce high amounts

of lint, it may be necessary to clean the ﬁlter

during the cycle.

• Somefabricsarelintproducers(i.e.,afuzzywhite

cotton towel) and should be dried separately from

clothes that are lint trappers (i.e., a pair of black

linen pants).

• SeetheExcess static in clothes after drying

section below.

• Dividelargerloadsintosmallerloadsfordrying.

• Checkpocketsthoroughlybeforewashingand

drying clothes.

Excess static in

clothes after drying

• Fabricsoftenernotusedor

used incorrectly.

• Clothesdriedtoolong

(overdried).

• Dryingsynthetics,permanent

press, or synthetic blends.

• Useafabricsoftenertoreducestaticelectricity

correctly. Do not use fabric softeners or products

to eliminate static unless recommended by the

manufacturer of the fabric softener or product.

• Overdryingaloadoflaundrycancauseabuildup

of static electricity. Adjust settings and use a

shorter drying time, or use SENSOR DRY cycles.

• Thesematerialscancausestaticbuildup.Try

using a fabric softener.

Loading ...

User Manual - Page 31