Loading ...
Loading ...
Loading ...
7
Dishwasher Features
Your Maytag dishwasher may have some or all of these features.
Split & Fit™ Utensil Basket
The split silverware basket can be
separated and placed in various
locations in the lower rack. Load
flatware and utensils into both
sections or just one, depending on
your load.
To split the basket:
Hold the basket firmly along the
sides. Unlock the baskets.
Auxiliary Basket (select models)
Use this supplemental basket
in the upper or middle rack for
loading miscellaneous items
and utensils. This is also a
proper place to load sharp
knives and pointed items.
Cup Clips
The Cup Clips located in the center of the upper
rack can be used to hold lightweight plastic items,
cooking utensils and knives in place. Clip the item
between the tine and the clip.
Vari-Lock™ Snugger
The Vari-Lock™ Snugger holds
lightweight plastic items such as
cups, lids, or bowls in place during
washing.
To adjust the Vari-Lock™ Snugger:
Grasp the wavy wire and rotate it to
the left to snug items against the
outer rack or rotate it to the right to
rest on top of light items.
Convertible Tines
The Convertible Tines in the back,
right corner of the lower rack can be
adjusted to provide narrow spacing
for loading plates or wide spacing for
loading deep bowls, pots or pans.
Flip tines up for narrow spacing or
down for wider spacing.
Stack-Rack™
Fold down the extra shelf on
the side of the upper rack or
lower rack to hold additional
cups, stemware or long items
such as utensils and spatulas..
Adjustable Upper Rack
The Adjustable Upper Rack can be raised or lowered to
accommodate taller plates, platters, pots or pans, in the upper,
middle or lower racks. Full size dinner plates can be loaded in the
upper rack if it is in the lower position.
NOTE: Always unload racks before adjusting.
To raise the rack, press
both rack adjusters and
lift the rack until it is in the
Up position and level.
To lower the rack, press
both rack adjusters and
slide the rack back to its
lower position.
Removable Upper Rack
The removable rack allows you to wash larger items such as stock
pots, roasters, and cookie sheets in the lower level rack.
IMPORTANT: Remove dishes prior to removing the upper rack
from the dishwasher.
To remove the racks (tab-lock rack stops)
1. Roll the rack ¹⁄₃ to ¹⁄₂ of the
way out.
2. Locate the rack stops at the
end of each track. Squeeze
the tab in the middle of the
rack stop and pull the rack
straight out. Be sure to
support the rack while
removing the rack stops.
3. Roll the rack all the way out of the track and remove from the
dishwasher.
To replace:
1. Replace the dishwasher rack by guiding the wheels into the
tracks.
2. Push each rack stop squarely into the end of the track until the
catch pops into the small hole on the side of the track.
Loading ...
Loading ...
Loading ...