Loading ...
Loading ...
Loading ...
MOTOR SAFETY FILTER CLEANING
WARNRNG
Electrical Shock Hazard
Unplug power cord from electrical
outlet, Do not operate the vacuum
cleaner without the motor safety filter.
Be sure the filter is dry and properly
installed to prevent motor failure andlor
electrical shock,
MOTOR SAFETY FILTER
Check motor safety
filter frequently and
clean when dirty°
Motor Safety
Filter .........
Remove the dust bag as outlined in the
DUST BAG REPLACEMENT section,
If the filter, located in the bottom of the dust
bag chamber, is dirty, remove it by pulling
forward out from under the ribs.
Wash the foam filter in warm soapy water,
rinse and dry thoroughly by squeezing the
filter in your hand and letting it air dry.
DO NOT wash in the dishwasher.
DO NOT install damp.
Replace the foam filter by sliding it back into
place under the ribs in the dust bag chamber°
Replace the dust bag as outlined in the
DUST BAG REPLACEMENT section,
EXHAUST FILTER REPLACEMENT
The HEPA exhaust filter must be replaced
when dirty_ It should be replaced regularly
depending on use conditions
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number
I. Remove
exhaust filter
cover by
pressing the
release tab on
the cover and
rotating out from
vacuum cleaner,
Filter Cover
Release Tab
2. Remove the filter cartridge from cover.
3. Place new filter cartridge into cover
making sure that airflow arrow on side of
cartridge points into cover.
Place foam seal of filter against the
vacuum cleaner body,
Exhaust
Filter
Seal Against
Vacuum Cleaner
Body---_
Exhaust
Filter
4. Replace the exhaust filter cover by
placing bottom tabs in slots and rotating in
until cover snaps into place,
18
Loading ...
Loading ...
Loading ...