Loading ...
Loading ...
Loading ...
l
DUST BAG REPLACEMENT 1
,J
TO REPLACE DUST BAG
WARNING
Always unplug power cord from elec-
trical outlet before performing mainte-
nance to the vacuum cleaner,
TO REMOVE DUST BAG
I. Pull on tile
dust bag
cover latch
located on
the side of
the dust bag
cover,
Dust Bag l_
Cover Latch.
NOTE: Do not pull on the bag safety
stop when removing/instatling the dust
bag.
2, Grasp the
Bag dust bag collar
Safety Stop and pull gently,
carefully
Bag removing the
dust bag from
the dust bag
Dust Bag holder°
3. Throw away the used dust bag
Do not reuse dust bag.
Dust Bag
Dust Bag
Motor
Safety
/
4, Check the
dust bag
holder and
the motor
safety filter
for dirt or
clogs,
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet fresh-
ener, face powder, fine dust, plaster,
soot, etco can clog the bag and cause
it to burst before it is full. Change bag
more often when vacuuming these
materials.
1. Unfold the
Dust
new dust bag. Bag
Fold the safety
seal tab on the
new dust bag
away from the //
opening that
?
fits on the bag
support
Safety
Seal Tab
Note: See PARTS AND FEATURES for
Bag number
S
2.Pushd.stbag
collar opening
completely over the
dust bag holder as
far as it will go,
3, Tuck the bag into
the dust bag
chamber. Be sure
the bottom and
sides of the dust
bag are completely
within bag cavity
prior to closing the
bag cover°
4. Close the bag
cover, You will hear
a distinct snap
when cover is
securely closed,,
Check to see that
the dust bag is
fully placed in the
bag chamber.
NOTE: If bag is not installed or not
installed properly the bag safety stop
prevents the door from closing.
17
Loading ...
Loading ...
Loading ...