Loading ...
Loading ...
Loading ...
www.BISSELL.com
6
D
Operations
1. Locate the power cord on the back of
the unit and plug in.
NOTE: The power cord can be pulled out
until the yellow mark is visible.
2. Turn on the vacuum by pressing the
power button on the base of the canister.
NOTE: The vacuum starts at the maximum
suction.
Once the machine has been turned on the
remote control can be used. The main power
button on the canister will need to be
activated at the start of every use before
the remote control will work.
3. When the dust cup reaches the MAX line,
turn off the machine and remove the dust
cup from the base of the machine, by
opening the lid and pulling up
4. To empty, locate the yellow tab that says
“push” and push to empty
5. Reassemble the dust cup after cleaning.
6. When cleaning is complete. Power off the
vacuum by using the remote, placing it on
standby. Then press the power button on
the base of the canister to turn the vacuum
completely off.
7. Unplug the vacuum from the electrical
outlet.
E
Care & Storage
To maintain maximum performance, perform
these simple maintenance steps.
E1 – Filter assembly, cleaning,
and replacement
1. Remove dirt bin from the base of
the canister.
2. Locate the filter on the back of the dirt
bin and pull the latches to separate the
filter from the bin.
3. Separate the pleated filter from the
foam filter.
4. Clean pleated filter by tapping it lightly
against the trash can.
5. The foam filter can be rinsed under water.
NOTE: Make sure the filter is dry before
replacing
6. Reassemble the components.
E2 – Post-motor filter cleaning
and replacement
1. Locate the post motor filter on the back of
the canister.
2. Remove the filter by pulling down on the
tab and pulling out.
3. Separate the filter from the door.
4. Tap out the filter or replace if needed.
5. Reassemble the components.
E3 – Hard floor tool cleaning
1. Use a coin or slotted screwdriver to turn
the knob from lock to unlock and remove
the roller brush cover.
2. Remove the brush from the chamber
for cleaning.
3. Replace the brush and secure the cover
making sure to lock it in place.
Battery replacement
Push the battery cover open and replace
batteries as indicated in the battery
chamber.
To reduce the risk of electric shock, turn power switch
o and disconnect plug from electrical socket
before performing maintenance or care.
Do not operate cleaner with damp or wet filters
or without all filters in place.
This product is intended for household use only and not for
commercial or industrial use. Vacuuming of dust from products
like plaster, concrete or ashes will damage the motor and void
the warranty.
Loading ...
Loading ...