Loading ...
Loading ...
Loading ...
www.BISSELL.com
5
A
Product View
C
Special Features
a. Variable Suction
The Hard Floor Expert is equipped with
variable suction to easily go from cleaning
carpets and hard floors to delicate surfaces
like drapes and upholstery.
1. Power Button Once the vacuum is
plugged in, press the main power button to
activate the remote control. Use the power
button on the remote to start and stop
cleaning.
NOTE: If the remote is not working, check
the placement of the batteries in the handle.
2. Increase Button “+” Press to increase
suction power.
3. Reduce Button “-” Press to decrease
suction power for use on delicate surfaces.
NOTE: the lights on the base of the canister
will indicate the level of suction power.
b. Hard Floor Tool
The hard floor tool is equipped to clean
hard floor surfaces such as wood, tile, and
laminate. This tool is ideal for removing fine
dirt and debris on hard flooring.
Note: The roller brush will only rotate on
hard floor surfaces. It can be used to clean
carpet, but the brush will not rotate.
c. Carpet Tool
Vacuum Carpeted Areas
Set the multi-surface brush switch to the
carpet position (brushes should retract).
Vacuum Hard Surfaces
Set the multi-surface brush switch to
the hard floor position (brushes should
be visible).
d. Storage
There are two storage options for your
Hard Floor Expert:
1. Locate the groove behind the machine
and connect the floor tool to the base
Or
2. Locate the groove on the backside of the
canister and connect the telescopic wand.
B
Assembly
You do not need any tools to assemble your
vacuum cleaner.
1. Connect the hose to the canister body.
Once it snaps, it is in place.
a. To disconnect the hose, squeeze the
snaps located on the side of the hose
connection and pull out
2. Connect the handle to the telescopic
wand by aligning the insert and securing it
in place. Once it snaps, it is in place.
3. Connect the desired floor brush to the
end of the telescopic wand by aligning the
insert and securing in place.
4. Snap the tool holder into place.
a. Dusting tool
b. Crevice tool
5. Pop open the battery cover on the
handle and place the two AAA batteries
in the correct location.
Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all instructions
and operating procedures.
Be careful to avoid injury as cord retracts very quickly.
Plastic film can be dangerous. To avoid danger of
suocation, keep away from babies and children.
Before using your vacuum, make sure that the dirt
cup and all filters are in place. Do not operate your
vacuum without the dirt cup and filters.
1 Hose Connector
2 Front Cover
3 Dust Bin (beneath cover)
4 Big Wheel
5 Variable Suction Controls
6 Rewind Button
7 Power Button
8 Carry Handle
9 Power Cord
10 Filter
11 Carpet Tool
12 Hard Floor Tool
13 Telescopic Wand
14 Tool Clip
15 Crevice Tool
16 Dusting Brush
17 Handle
18 Hose
Loading ...
Loading ...
Loading ...