Loading ...
Loading ...
Loading ...
To set the speed limit, proceed as follows:
1. Briefly push the SET/BACK button. The display will
show the message (Speed Buzzer).
2. Push and release the up or down arrow button to
select speed limit activation (On) or deactivation
(Off).
3. When the function is activated (On), briefly push the
SET/BACK button to display the previously set
speed. Pushing the up or down arrow buttons selects
the speed limit. Push SET/BACK to confirm selec-
tion.
NOTE: The setting can be increased or decreased by
5 MPH or km/h each time the up or down arrow button
is pushed for speed settings above 20 MPH (32 km/h).
To increase or decrease the set speed rapidly, push and
hold the up or down arrow button. Save the setting by
briefly pushing the button when you approach the
required setting.
Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the SET/BACK button
(approximately one second) to go back to the main
screen without storing the settings.
To cancel the setting, proceed as follows:
1. Briefly push the SET/BACK button. “On” will dis-
play.
2. Push and release the down button. “Off” will dis-
play.
3. Briefly push the SET/BACK button to go back to the
menu screen, or push and hold the SET/BACK
button (approximately one second) to go back to the
main screen without storing the settings.
Trip B Activation
Through this option, it is possible to activate (On) or
deactivate (Off) the Trip B (partial trip) display.
For further information, see “Trip Computer.”
For activation/deactivation, proceed as follows:
1. Briefly push the SET/BACK button. “On” or “Off”
will display in the instrument cluster display (ac-
cording to previous setting).
2. Push and release the up or down arrow button to
select the setting and once selected a beep will occur
to signal the setting is saved.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 119
Loading ...
Loading ...
Loading ...