Loading ...
Loading ...
Loading ...
10
4. Safety instructions for your health
Warning
To prevent harm to your health, we urgently
recommend that you not use the unit in the
following situations:
•Iftheunit,mainscable/plugoraccessories
are visibly damaged. When in doubt, do not
use the unit and contact your dealer or the
customer service address provided.
To avoid harm to your health, observe the
following points:
• Pull the cord out of the socket by the mains
plug only.
• For additional protection, we recommend
installingaresidual-currentdevice(RCD)
witharatedcurrentofnomorethan30mA
in the electrical circuit of the bathroom. More
information can be obtained from your local
electrical supply store.
•Donotuseanyadd-onpartsthatarenot
recommendedbythemanufactureroroered
as an accessory.
• Ensure that there are no highly flammable
liquids in the vicinity of the unit.
• Place the unit only on a fireproof surface.
• Do not use the unit on artificial hair – fire
hazard!
• The straightener must not be covered – fire
hazard!
•Neveropenorattempttorepairtheunityour-
self, as otherwise proper function is no longer
guaranteed. Failure to observe this regulation
shall void the warranty.
• If the unit malfunctions or is damaged, have it
repaired by a qualified specialised workshop.
• Do not use the unit if it has fallen or been
dropped on the floor or is otherwise damaged.
• Do not use an extension cord in the bathroom,
so that you can quickly reach the mains plug
in an emergency.
•Neverleavetheunitunsupervisedduring
operation.
• Do not use the unit in the open air.
• If you give the unit to a third party, you must
include these instructions for use.
Danger
• If the unit falls into water despite all safety
precautions, remove the plug from the socket
immediately! Do not reach into the water!
• Before using the unit again, have it checked
byanauthorisedspecialisedworkshop!Risk
of fatal injury from electric shock!
•Neverimmersetheunitinwateroranother
liquid!
Before using the unit for the first time
Warning
• Keep children away from packaging materials
–riskofsuocation!
• Before you use the unit for the first time,
remove all packaging materials.
• Plug the unit into a socket with the voltage
specified on the identification plate only.
Loading ...
Loading ...
Loading ...