Loading ...
Loading ...
Loading ...
ENGLISH
Temperature setting
Use this function to adjust the desired temperature.
: Increase 1 ˚C or 1 ˚F each time pressed.
: Decrease 1 ˚C or 1 ˚F each time pressed.
d
Fan Mode
NOTE
• Press the FAN SPEED button to select the airflow
rate from low → medium → high or chaos.
• Natural wind based on chaos logic
− For a fresher feeling than other fan speeds,
press the Indoor Fan Speed Selector and set to
chaos mode. In this mode, the wind blows like
a natural breeze by automatically changing fan
speed based on the chaos logic.
• During Fan Mode
− The outdoor compressor doesn’t work. Have a
function to circulate the indoor as it sends out
the air that doesn’t have much temperature
difference with indoor.
1
Turn the appliance on.
2
Press the MODE button to select the Fan Mode.
Switching between Celsius/
Fahrenheit
Setting the Current Time
NOTE
• Check the indicator for A.M. and P.M.
Individual vane angle control
(Optional)
This is the function that controls the 4 vane angles
individually in the 4-way ceiling cassette products.
NOTE
• There may be differences between the up/down/
left/right buttons on the wireless remote controller
and the wind discharge port directions.
• Set the desired angle while checking the movement
and angle of the product’s vanes.
• The individual vane control function is an additional
function of a product, and it may not work in some
products.
1
Press and hold the SET / CLEAR button for 3
seconds.
2
Press the , buttons until the desired time
is set.
• If you press down and hold the button for a
long time, the time will change more quickly in
10 minute increments.
1
Press the VANE ANGLE button.
• The individual vane angle control symbol will
blink.
2
Set each vane angle by pressing the VANE
ANGLE button.
3
Press the SET/CLEAR button to reserve or
cancel the individual vane angle control function.
1
Press and hold the ROOM TEMP button long for
5 seconds to change from Celsius to Fahrenheit
or from Fahrenheit to Celsius.
OPERATION
13
Loading ...
Loading ...
Loading ...