Loading ...
Loading ...
Loading ...
45
4 Permanent settings in programming mode
pt
es
nl
it
fr
ru
en
de
E If milk has been prepared, you will be
prompted to clean the milk system
(
M-CLEAN / START ?). After 10 seconds
the switch-off process continues automati-
cally.
RINSING, the system rinses itself. The
operation stops automatically. Your ENA is
switched off.
4 Permanent settings in pro-
gramming mode
Products
You can make the following permanent settings:
U
Espresso
U
Amount of water: 15ML – 80ML
U
Coffee strength: 10 levels
U
Temperature: NORMAL, HIGH
U
Coffee
U
Amount of water: 25ML – 240ML
U
Coffee strength: 10 levels
U
Temperature: NORMAL, HIGH
U
Latte macchiato and cappuccino
U
Amount of milk foam: 3SEC – 120SEC
U
Interval: 0SEC – 60SEC
U
Coffee strength: 10 levels
U
Amount of water: 25ML – 240ML
U
Temperature: NORMAL, HIGH
U
Milk foam
U
Amount of milk foam: 3SEC – 120SEC
U
Hot water
U
Amount of water: 25ML – 450ML
Permanent settings in programming mode always
follow the same model.
Example:Permanently change the coffee strength
(
FLAVOUR) of an espresso.
Precondition:
READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
PRODUCT is
displayed.
T Press the Rotary Switch to enter the
programme item.
SELECT BUTTON
E Next select the button of the product for
which you would like to make settings. No
product is prepared at this point.
< T Press the Espresso button.
ESPRESSO
WATER
T Turn the Rotary Switch until FLAVOUR is
displayed.
T Press the Rotary Switch to enter the
programme item.
nnnnnnkkkk (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is now set.
FLAVOUR
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
E If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
Loading ...
Loading ...
Loading ...