Loading ...
Loading ...
Loading ...
9
Check if the washing machine is
level.
7
When the installation is complete, look at the
spirit level of the washing machine to check if it
is installed level.
If the bubble is inside the circle mark at the ●
centre of the spirit level, the washing machine is
installed level.
If the bubble is not inside the circle mark at the ●
centre of the spirit level, correct the position.
Bubble
Circle mark
When using the levelling rubber pad ●
(supplied):
Attach the levelling rubber pad to the leg of
which you want to raise the height.
To raise the height by 5 mm:
attach the pad as is.
To raise the height by
10 mm: fold the pad in half
and attach it.
When using the adjustable leg on the front ●
right of the bottom of the washing machine:
Loosen Tighten
Adjust
LowerHigher
Note
To prevent water leaks: ●
Use the supplied brand new water supply –
hoses.
Do not connect the water supply hoses for –
hot/cold water to the wrong water taps.
Tighten the nuts firmly. –
Do not forcibly bend the water supply hoses. –
(This will cause the hoses to crack.)
The installation shall be in accordance with the
●
requirements of AS/NZS 3500.1.
Cautions for use
Do not add too much detergent. (This will ●
cause poor rinsing or cause the foam to
overflow and wet the floor.)
Do not load too many clothes. Limit the load
●
size to a level below the balance ring. (Not
doing so will tear clothes and damage the
resin parts of the washing machine.)
Do not place objects on the washing ●
machine during use. (This will cause the
objects to shake and fall. Malfunction may
result.)
Do not place a TV, radio, or other electronic ●
devices near the washing machine. (This will
cause images to appear distorted and create
noise.)
Do not bring magnets or any magnetic ●
objects over the washing machine.
(Malfunction may result.)
If detergent or softener comes in contact with ●
the washing machine (particularly the lid or
the control panel), wipe it off immediately
with a towel wrung out of water or similar
cloth. (Not doing so will cause the printed
information to come off, damage the resin
parts, corrode the metal parts or result in
malfunction.)
Exercise extra care when using concentrated
liquid detergent. If the resin parts come in
contact with the detergent, it may cause
cracks on the parts.
Do not directly cover the washing machine ●
with a cover made of vinyl chloride. (This
may damage the surface of the washing
machine.)
Do not spray pesticides, hair products, ●
deodorants or other such liquids. (This may
cause the washing machine to malfunction
or damage it.)
1$)6B*BHQJLQGG
Loading ...
Loading ...
Loading ...