Loading ...
Loading ...
Loading ...
8
Installation (Continued)
Connect the water supply hoses
to water taps.
5
Press the other end of the water supply hose
(grey) connected to the washing machine
straight against the cold water tap, and
tighten the nut clockwise with your hand.
Likewise, connect the other end of the
water supply hose (white) connected to the
washing machine to the hot water tap.
Turn on the water taps to check that water ●
leaks from neither the water supply valves of
the washing machine nor the water taps.
Be sure to plumb the washing machine into ●
both hot and cold water supplies. Otherwise,
some cycles may not function correctly. (The
washing machine is not equipped with an
internal heater to heat water.)
Water-flow from the tap should be more than ●
5 L/min.
Do not use hot water above 60 °C (for hot ●
water supply) and cold water above 25 °C (for
cold water supply) to prevent a fault or
damage to the washing machine.
If you have an uncontrolled water heating ●
source (e.g., wet back, solar heating), fit a
tempering device (e.g., a safe valve). This will
ensure the hot water temperature remains
within safe limits. Contact a local plumber or
plumbing supply merchant for the most
suitable type of tempering device.
Connect the power plug.
6
Plug the power cord into a dedicated household
3-pin AC outlet rated at 10 A, 220 V to 240 V. If
you are not sure, contact a qualified electrician.
1$)6B*BHQJLQGG
Loading ...
Loading ...
Loading ...