Loading ...
Loading ...
Loading ...
EN-10
Warning: When a drain hose longer than 4 m is used, the dishes might
remain dirty. In that case, SHARP will not accept responsibility.
Electrical connection
The earthed plug of your machine should be connected to an earthed outlet
supplied by suitable voltage and current. If there is no earthing installation,
have a competent electrician to carry it out. In case of usage without earthing
installed, our company will not be responsible for any loss of usage that might
occur.
The indoor fuse current value should be 10-16 A. Your machine is set accor-
ding to 220-240 V. If the mains voltage in your location is 110 V, connect a
transformer of 110/220 V and 3000 W inbetween.
The machine should not be plugged in during positioning. Always use the coa-
ted plug supplied with your machine. Running in low voltage will cause a decli-
ne in washing quality. The machine’s electrical cable should be replaced by an
authorised service or an authorised electrician only. Failure to do so may lead
to accidents. For safety purposes, we recommend that you disconnect the
plug when the machine is not going to be used for an extended period of time.
In order avoid electric shocks, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the
plug. Never pull the cord itself.
CHAPTER -3: INSTALLING THE MACHINE
Loading ...
Loading ...
Loading ...