Loading ...
Loading ...
Loading ...
17
English
EN
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. You
can select disc, radio or USB as alarm source.
1 Make sure that you have set the clock
correctly.
2 Press and hold SLEEP/TIMER for more
than two seconds.
» ‘TIMER SET’ is displayed. Then, a
prompt to select the sound source is
displayed.
3 Press SOURCE to select a source from
DISC, USB and FM, then press SLEEP/
TIMER to conrm.
» The hour digits are displayed and begin
to blink.
4 Press / repeatedly to set the hour,
then press SLEEP/TIMER to conrm.
» The minute digits are displayed and
begin to blink.
5 Press / repeatedly to set the minute,
then press SLEEP/TIMER to conrm.
» A prompt to select the volume level is
displayed.
6 Press +/- to select the desired volume
level, then press SLEEP/TIMER to conrm.
» The alarm timer is set and activated.
To deactivate or re-activate an alarm timer
• In standby mode, press SLEEP/TIMER
repeatedly.
» When the alarm timer is deactivated,
‘’TIMER OFF is displayed.
» When the alarm timer is re-activated,
‘TIMER ON’ is displayed.
Tip
•
In BT, AUDIO IN or AUX IN mode, the alarm timer
cannot be set.
• If the disc or USB source is selected but no audio le
can be played, FM radio is activated automatically.
Set the sleep timer
This unit can switch to standby
automatically after a set period of time.
• When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
To deactivate sleep timer
• Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
Restore default settings
You can also restore the default
settings of the unit.
• In any mode, press and hold
on the front
panel for more than ve seconds.
» After a while, ‘RESET OK’ is displayed.
Then, the device reboots automatically.
Loading ...
Loading ...
Loading ...