Loading ...
Loading ...
Loading ...
7. Press the Timer/Temperature button twice to set the temperature.
The numbers will flash on the LED display when the temperature is
ready to be set. The temperature can be set between 5-35°C. Press
the ‘+/-’ buttons to set the desired temperature.
8. To use the humidifier, remove the back cover and water tank, and
fill the tank with clean filtered water. After filling, ensure the lid is
secured and replace inside the unit. Replace the back cover. Adjust
the humidifier dial on the side of the unit – the indicator light should
also be illuminated. Mist output can be adjusted with the dial.
9. Press the SWING button to activate oscillation mode. Press again to
deactivate this mode.
10. Press the ON/OFF button to turn the unit off. It will take approx. 10
seconds for the fan to turn off and enter standby mode.
CLEANING AND MAINTENANCE
Cleaning
Your unit is designed to remove dirt and other atmospheric impurities by
drawing air through the air filter. Do NOT block the air filter, as this will
impair the efficiency of the unit. Pushing the unit up against a wall or
operating it in close proximity to long window drapes will also impair the
unit’s air flow and efficiency.
1. Disconnect the appliance from the main supply and allow to
completely cool down.
2. Use a soft cloth to wipe any dust from the heaters surface. If the
surface is too dirty, use warm soapy water and a soft cloth to clean.
Do not use solvents or abrasive products.
Loading ...
Loading ...