Loading ...
Loading ...
Loading ...
Starting a programme with Delay Start
1. Close the appliance door.
2. Open the water tap.
3. Press the on/off button to activate the
appliance.
4. Set a programme.
5. Press Delay Start to delay start of a programme
by up to 24 hours.
The pre-wash indicator comes on.
6. Press Start / Pause to start the countdown.
":" symbol flashes.
When the countdown is completed, the programme
starts automatically.
Cancelling Delay Start
1. Press Start / Pause.
2. Press Delay Start until 0 comes on.
3. Press Start / Pause. The programme starts
automatically.
Interrupting a programme
1. Open the appliance door.
The appliance stops.
2. Close the appliance door.
The programme continues from the point of
interruption.
Cancelling a programme
Press and hold on/off button for about 3 seconds
to cancel the programme.
Make sure that there is detergent in
the detergent dispenser before you
start a new programme.
End of a programme
When a programme is completed, an intermittent
acoustic signal sounds for approximately 8
seconds.
1. Press the on/off button to deactivate the
appliance.
2. Close the water tap.
• Let the dishes become cold before
you remove them from the
appliance. Hot dishes can be easily
damaged.
• There can be water on the sides
and on the door of the appliance.
Stainless steel becomes cool more
quickly than the dishes.
DAILY USE
USE OF THE APPLIANCE
1. Fill the salt container with salt for dishwashers.
2. Fill the rinse aid dispenser with rinse aid.
3. Load the basket.
4. Open the water tap.
5. Set the correct programme for the type of load
and the degree of soil.
6. Add the detergent.
7. Start the programme.
USE OF DISHWASHER SALT
Hard water contains a high quantity of minerals that
can cause damage to the appliance and bad
washing results. The water softener neutralises
these minerals.
Contact your local water authority for information
about the hardness of the water in your area.
CAUTION! Only use salt specifically
designed for dishwashers. Other types
of salt will cause damage to the
appliance.
Filling the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (Only
for the first time).
3. Use the funnel to fill the salt container with
dishwasher salt.
4. Remove the salt around the opening of the salt
container.
5. Turn the cap of the salt container clockwise to
close the salt container.
Water and salt can come out from the
salt container when you fill it which
poses a risk of corrosion. To prevent it,
start a programme immediately after
filling the salt container.
Refill the salt container when salt
indicator on the display comes on.
7
Loading ...
Loading ...
Loading ...