Loading ...
Loading ...
Loading ...
13
The produce preserver pouches should be installed in the
housing,
located on the wall of one of the crisper drawers.
1. Remove the FreshFlow™ Produce Preserver pouches
from
the packaging.
2. Lift up on the housing to remove it from the mounting tab.
3. Open the housing by pulling up and out on the back
of
the top of the housing.
4. Place both pouches inside the housing, then snap
the
housing back together.
5. Place the housing back on the mounting tab.
Installing the Status Indicator
The produce preserver comes with a status indicator, which
should
be activated and installed at the same time the pouches
are
installed.
1. Place the indicator face-down on a firm, flat surface.
2. Apply pressure to the bubble on the back of the indicator
until
the bubble pops, to activate the indicator.
3. Slide open the cap on the top of the produce
preserver
housing.
4. Place the indicator in the top of the housing, facing outward.
5. Slide the cap closed, and check that the indicator is visible
through the rectangular hole in the cap.
NOTE: The cap will not easily close if the indicator’s bubble
has
not been popped.
Replacing the Produce Preserver
The disposable pouches should be replaced every 6 months, when
the status indicator has completely changed from white to red.
To order replacements, contact us. See “Accessories”
for
information on ordering.
1. Remove the used pouches from the produce preserver
housing.
2. Remove the used status indicator.
3. Install the replacement pouches and status indicator using
the
instructions in the previous sections.
Accessories
The following accessories are available for your refrigerator.
To
order, contact us and ask for the part numbers.
In the U.S.A., visit our web page www.whirlpool.com/
accessories or call 1-800-901-2042.
In Canada, visit our web page www.whirlpool.ca
or call 1-800-807-6777.
affresh
®
Stainless Steel Cleaner:
Order Part #W10355016
affresh
®
Stainless Steel Wipes:
Order Part #W10355049
affresh
®
Kitchen & Appliance Cleaner:
Order Part #W10355010
Water Filter:
Order Part #W10295370A or FILTER1
Air Filter:
Order Part #W10311524 or AIR1
Produce Preserver:
Order Part #W10346771A or FRESH1
Water Filter, Air Filter and Ethylene Filter Bundle Pack:
Order Part #W103655758BL
REFRIGERATOR USE
Opening and Closing Doors
There are two refrigerator compartment doors. The doors
can
be opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
■ When the left-hand refrigerator door is opened, the hinged
seal
automatically folds inward so that it is out of the way.
■ When both doors are closed, the hinged seal automatically
forms a seal between the two doors.
Using the Controls
IMPORTANT:
■ Wait 24 hours for your refrigerator to cool completely before
adding food. If you add food before the refrigerator has cooled
completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature
controls to a colder than recommended setting will not cool
the
compartments any faster.
■ The recommended setting should be correct for normal
household refrigerator use. The controls are set correctly when
milk or juice is as cold as you like and when ice cream is firm.
CAUTION
IR
R
IT
A
N
T
Read cautions on back.
ATTENTION
IR
R
ITA
N
T
Lisez des prudences sur le revers.
A. Hinged seal
A
Loading ...
Loading ...
Loading ...