Loading ...
Loading ...
Loading ...
Sensors en
33
H Sensors
Sensors
Automatic load sensing
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note: Place large and small items of
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 38
Q Appliance settings
Appliance settings
You can change the following settings:
■ The volume of the information
signals (e.g. at the end of the
programme) and/or
■ The volume of the button signals
and/or
■ Switch on or off the drum clean
reminder
*
.
In order to change these settings you
will need to activate the setting mode.
Activating the setting mode
1. Turn the programme selector to
position 1. The washing machine is
switched on.
2. Press the Start Reload A button
and, at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel
(e.g. at the end of the programme).
Changing the volume
■ To change the volume of the
information signals, use the Ready
in button while the programme
selector remains at position 2.
■ To change the volume of the button
signals, rotate the programme
selector to position 3. Use the
Ready in button again to change the
volume.
* depending on the model
1/2/3/4... positions on the
programme selector
Loading ...
Loading ...
Loading ...