Loading ...
Loading ...
Loading ...
40_ Installing your dishwasher
STEP 2. CHECKING WATER SUPPLY AND ELECTRICAL
REQUIREMENTS
• The water supply line pressure must be between 0.04-1.0 MPa.
• Supply cold water only. Make sure that the water temperature does not exceed 60 ˚C.
• Do not supply hot water. Otherwise, the product may malfunction.
• Use a rated power of 220-240 V~, 50 Hz.
• Install the product while the power cord is unplugged.
• Use a power outlet with a maximum allowable current of 16 A. (The maximum current for this dish
washer is 11 A.)
• When powering the dishwasher, ensure that your power supply has:
- An 220-240 V~, 50 Hz fuse or circuit breaker.
- An individual branch circuit serving your dishwasher.
• After the installation, check if the power cord is not bent or damaged.
• Ensure that the water supply valve is turned o before connecting the water supply line to the
dishwasher.
• Seal the water supply line connections using teflon tape or sealing compound to stop any water
leakage.
STEP 3. PREPARING THE CUSTOM PANEL
(FOR FULLY BUILT IN AND SEMI BUILT IN DISHWASHER)
The custom panel should be processed in accordance with the illustrated dimensions.
ՐՓՔ
ՒՍՋطđǹظ
ՍՋطđǹظ
ՐՌՒ
ՏՒՏՓ
ՌՍՒ
ՐՑՑۈՋՍ
ՏՐՌۈՋՍ
ՐՏՋۈՋՍ
ՒՐۈՋՍ
ՑՍ
ՍفŝՌՌ
ՎՓ
ՎՋ
ՏՎՑ
ف
ՓفŝՍطՓظ
ՏفŝՍطՓظ
ՍفŝՍطՓظ
ՍفŝՐՐ
ՐՓՔ
ՐՑՑ
ՍՍՋ
ՍՍՋ
ՐՒՋطđǹظ
ՎՔՒ
ՌՌՐՐ
ՍՋՍ
Ւ
ՍՋ
ՍՋ
ՑفŝՌ
ՓفŝՍ
ՎՑ
ՌՐ
ՌՐ
ՌՓ
ف
ՑفՓ
ՑفAՌՐ
ՓفՔՐ
Fully built in
Semi built in
CAUTION
WARNING
Installing your dishwasher
DW5500M-02437D-0 EN.indd 40DW5500M-02437D-0 _EN.indd 40 3/14/2017 5:30:50 PM3/14/2017 5:30:50 PM1
Loading ...
Loading ...
Loading ...