Loading ...
Loading ...
Loading ...
ENGLISH
INSTALLATION INSTRUCTIONS
CHOOSE THE PROPER LOCATION CLEARANCES
To ensure sufficient clearance for
water lines and airflow, allow minimum
clearances of at least 1 inch (2.5 cm) at
the sides and 4 inches (10 cm) behind
the unit. Be sure to allow for wall, door,
or floor moldings that may increase the
required clearances.
wWARNING
Washer is heavy! Two or more people
are required when moving and unpacking
the washer. Failure to do so can result in back
or other injury.
Store and install the washer where it will not
be exposed to temperatures below freezing
or exposed to outdoor weather conditions.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
Properly ground washer to conform with all
governing codes and ordinances. Failure to
follow this warning can cause serious injury, fire,
electric shock, or death.
To reduce the risk of electric shock, do not
install the washer in humid spaces. Failure to
follow this warning can cause serious injury, fire,
electric shock, or death.
The base opening must not be obstructed by
carpeting when the washer is installed on a
carpeted floor.
Do not remove ground prong. Do not use
an adapter or extension cord. Plug into a
grounded 3-prong outlet. Failure to follow this
warning can cause serious injury, fire, electric
shock, or death.
Power Outlet
The power outlet must be within 60 inches
(1.5 m) of either side of the washer.
The appliance and outlet must be positioned so
that the plug is easily accessible.
Do not overload the outlet with more than one
appliance.
The outlet must be grounded in accordance with
current wiring codes and regulations.
Time-delay fuse or circuit breaker is
recommended.
NOTE: It is the personal responsibility and
obligation of the product owner to have a
proper outlet installed by a qualified electrician.
Allow at least 24 inches (61.2 cm) in
front of the washer to open the door.
29
3
/4"
(75.6 cm)
51"
(129.5 cm)
21
1
/4
(54 cm)
4"
(10 cm)
27"
(68.6 cm)
1"
(2.5 cm)
1"
(
2.5
cm)
9
MFL62526898_en_110726.indd 9 2011.7.26 10:32:4 AM
Loading ...
Loading ...
Loading ...