WM2350HRC User Manual

Loading ...

ENGLISH

HOW TO USE

At the beginning of the cycle,

the washer tumbles the load

and detects the weight of the

clothes. The display will indicate the approximate

load size in the LOAD SIZE display. This allows

you to adjust the amount of detergent and other

additives for best results and improved efficiency.

CUSTOM PROGRAM

LOAD SIZE SENSING SYSTEM

CUSTOM PROGRAM allows you

to store a customized wash cycle

for future use. It allows you to save

favorite temperature, spin speed, soil

level, and other options for a cycle,

and then recall them at the touch of a button.

To store a Custom Program:

Select a cycle.

Adjust the Wash/Temp., Spin Speed, and Soil

Level to the desired settings.

Set any other desired options.

Press and hold the CUSTOM PROGRAM

button for 3 seconds. You will hear two

beeps to confirm the settings have been

stored.

To recall a Custom Program:

Press and release the CUSTOM PROGRAM

button. The stored settings will be displayed.

Press and release the START/PAUSE button

to start the cycle. The washer will start

automatically.

To use Automatic Load Size Sensing:

Load the washer, select the desired cycle and

options, and then start the cycle by pressing

the START/PAUSE button.

The washer will tumble for a short time to

detect the size of the load. After the washer

detects the load size, the washer will show the

detected size in the LOAD SIZE display for 10

seconds before it continues with the cycle.

During the 10 second delay in step three, press

the START/PAUSE button to pause the cycle.

Fill the detergent and additive compartments

of the detergent drawer with detergent/dditive

amounts based on the load size the machine

has detected. Following these guidelines can

save detergent.

Press the START/PAUSE button again to

resume the cycle.

To check the load size during the wash portion of

the cycle, press and hold the RINSE+SPIN button

for 3 seconds. The LOAD SIZE display will be

activated for 10 seconds.

NOTE: The load detection routine only works with

dry clothes. Since the detection system is detecting

the WEIGHT of the load, it will be affected by

unusually heavy articles in the load. For example,

a garment that is already wet that is loaded with

other items will cause the LOAD SIZE reading to be

inaccurate.

If you do not desire to take advantage of the load

size detection feature, simply load the desired

amount of detergent and additives in the dispenser

and start the washer in the usual manner.

IMPORTANT: If you press and hold the

CUSTOM PROGRAM button for 3 seconds, you

will overwrite any previously stored CUSTOM

PROGRAM.

The LOAD SIZE display:

Example 1 : If the washer has detected a small load

size, the display may only show one lighted bar. Only

a small amount of detergent should be used, because

the amount of clothing and the quantity of water that

will be used is small.

NOTE: Because the washer uses a very small

amount of water, care should be taken when

deciding how much detergent to use. Normal loads

only need about half the detergent manufacturer’s

recommended amount. This saves detergent by

using it in a more concentrated manner. However,

for heavily soiled loads, additional detergent should

be added. Never exceed manufacturer

Example 2 : If the washer has detected a large load

size, the display may show all four bars lighted.

More detergent should be used, because the

amount of clothing and the quantity of water that

will be used is greater.

Recommended

amount for

this load

Detergent

manufacturer’s

recommended

amount for a full

load