Loading ...
Loading ...
Loading ...
9
Before installing your appliance, read all safety instructions in this manual,
especially the sections on electrical safety and installation.
INSTALLATION
UNPACKING
• When unpacking the appliance, be sure to keep all the packaging materials
until you have made sure your new appliance is undamaged and in good
working order. This product has been packaging to protect itself
against transportation.
• Be sure to remove all packaging materials around the appliance and that
the plastic film used is also removed.
• CAUTION: Plastic wrapping can be a suffocation hazard for babies and young
children. Make sure all packaging materials are out of reach for children and
that they are disposed of correctly.
INSTALLATION
• Place the microwave oven on a flat, stable surface that can support
the weight of the oven. Do not place the microwave oven where heat, moisture
or high humidity are generated, or near combustible materials.
• The microwave oven is intended to be used freestanding and must not to be
placed in a cabinet.
• The microwave oven must have plenty of airflow. Allow 30cm of space above
the oven, 10cm at the back and 5cm on both sides. Do not cover/block any
openings on the appliance. Do not remove the feet.
• Place the support/roller ring in its position in the cavity base and the shaft in
the centre. Then fit the glass tray on top of the shaft, make sure it sits in place
and can move freely on the roller ring.
• Do not operate the appliance without the glass tray, roller ring and
shaft in their correct positions.
• The power cord must not run under the oven or over any hot or sharp surface.
• Make sure that the power socket is easily accessible so it can be unplugged
in an emergency.
Loading ...
Loading ...
Loading ...