Loading ...
Loading ...
Loading ...
118
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback
Wireless Features
Setting Menu
Accessories
Appendix
Wi-Fi
Device with same IP address exists on selected network
● Reset the IP address so that it does not conict with another.
Disconnected/Could not send the image
● You may be in an environment where Wi-Fi signals are obstructed.
● Avoid using the camera’s Wi-Fi function around microwave ovens and other
devices that operate on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
● Check the connected device to make sure it is not experiencing errors.
Not enough free space on server
● Delete unneeded images on the server and check the free space before you
attempt transmission again.
Check the network settings
● Make sure your computer can connect to the Internet under the current network
settings.
Errors and Warnings
If an error message is displayed, respond as follows.
Error Codes
● In case of problems with the camera, error codes (in the format Errxx) and
recommended responses are displayed.
Number Message and Response
02
Card cannot be accessed. Reinsert/change card or
format card with camera.
→ Reinsert the memory card, use a different card, or
format the card.
04
Cannot save images because card is full. Replace
card.
→ Use a different memory card, erase unneeded
images, or format the card.
10, 20, 30, 40,
50, 60, 70,
80, 99
An error prevented shooting. Turn the camera off and
on again or re-install the battery.
→ Use the power button or reinsert the battery pack.
* If the problem persists, write down the error code (Errxx) and contact a Customer
Support Help Desk.
Loading ...
Loading ...
Loading ...