Loading ...
Loading ...
Loading ...
8
Cycle and Option Descriptions
This information covers several different models. Your dishwasher may not have all of the cycles and options described. Estimated
cycle times may increase or decrease depending on water temperature, soil conditions, dish load size, and options selected. You can
customize your cycle by selecting an option.
See option selections. If you change your mind, press the option again to turn off the option, or select a different option. You can
change an option anytime before the selected option begins. At each stage of the wash cycle, you may hear noises that you are not
used to hearing in your previous dishwasher. Each cycle will provide a series of pauses and water sprays throughout the wash cycle.
This is normal and will provide optimal cleaning performance.
CYCLE SELECTIONS
CYCLES ESTIMATED
WASH TIME
(HH:MM)
WATER USAGE
GALLONS
(LITERS)
The most advanced and versatile cycle. This cycle senses load size, soil amount,
and toughness of soil, to adjust the cycle for optimal cleaning using only the
amount of water and energy needed. Use for all soil levels.
2:30 3.38 to 7.4
(12.8 to 28.0)
Use for hard-to-clean, heavily soiled pots, pans, casseroles, and tableware. 3:28 7.4
(28.0)
This cycle, with only the Heat Dry option selected, and without other options
selected, is recommended to completely wash and dry a full load of normally
soiled dishes. The energy usage label is based on this cycle and option
combination.
2:32 2.4 to 7.4
(9.09 to 28.0)
For fast results, 1-Hour Wash will clean dishes using slightly more water and
energy. Select the Heat Dry option to provide best drying performance.
1:00 7.87 (29.8)
This cycle quietly soaks dishes with an extended prewash which eliminates the
need to presoak dishes, saving personal time and effort. For optimal cleaning
results during the Soak & Clean cycle, add prewash detergent. Use this cycle
for loads with heavy amounts of dried-on or hard-to-clean baked-on food.
7:31 7.4 (28.0)
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME
TO CYCLE
ADDED
WATER
GALLONS
(LITERS)
Raises main wash temperature to improve
cleaning for loads containing tough, baked-on
food.
Sensor
Heavy
Normal
Soak & Clean
Raises the main
wash temperature
to 135°F (57°C).
0:05 to 0:13 0 to 3.86
(0 to 14.6)
Sanitizes dishes and glassware in accordance
with NSF International NSF/ANSI Standard 184
for Residential Dishwashers. Certied residential
dishwashers are not intended for licensed food
establishments. The Sanitized indicator at the end
of the cycle shows whether the Sani Rinse option
was successfully completed. If the indicator does
not activate, it is probably due to cycle being
interrupted.
Sensor
Heavy
Normal
Raises the main
wash temperature
to 135°F (57°C)
and the nal rinse
temperature to
156°F (69°C).
0:05 to 1:06 0 to 3.86
(0 to 14.6)
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts
the cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy,
the cycle will automatically compensate by adding time, heat and water as needed.
Loading ...
Loading ...
Loading ...