Loading ...
Loading ...
Loading ...
INSTALLATION
Finishing the installation
1� Fit the steam protection tape to the underside of the
countertop�
steam protection foil
tape #ES6060 from
spare parts
2� Adjust the dishwasher feet according to the slope of the
floor then carefully slide the dishwasher into the cavity�
*recommended opening
min. 600mm*
820mm
570mm
WARNING
CAUTION
When installing the dishwasher into the cavity, take care
not to crush or kink the hoses or electrical cable.
In some cases you may need to remove the top concrete
counterwieght and trim the felt with a knife� To remove
the counterweight, follow the steps below�
WARNING
CAUTION
If the counterweight has been removed, the dishwasher
must be stabilised by wedging a piece of timber between
the dishwasher and the underside of the countertop.
To remove the felt and the dishwasher support blocks:
Lift and cut felt�
Remove 2 blocks of foam as shown�
INSTALLATION 13
Loading ...
Loading ...
Loading ...