Loading ...
Loading ...
Loading ...
The Energy Saving feature saves energy by turning
off the display by pressing the Energy Saving button.
The display will automatically turn off after 5 minutes
of idleness if the clock has not been set.
If the clock has been set,then the display will not
automatically turn off.
- 10 -
1.
Press Energy Saving to
turn the display off.
2. P
ress Energy Saving to
turn the display on.
COOKTOP LIGHT
The button on the bottom left of the control panel
controls the cooktop light.
Example: To set the Lamp for ON
1.
Press Light On/Off.
To turn on, press once.
"Light" will flash in display,
then stay on.
2.
Press Light On/Off.
To turn off, press button again.
"Light" will disappear from the
display.
VENT HI/LOW/OFF
The vent removes steam and other vapors from
the surface cooking area.
Pressent!)6&4!0;89+4()'3&&*< twice for
Low fan speed, or three times to turn the fan off.
Press once. "Vent" will flash and
"High" will show briefly in the display.
Press twice. "Vent" will flash and
"Low" will appear briefly in the
display. Press again and the fan
will turn off. "Vent" will disappear
from the display.
ADD 30 SEC
A time-saving button, this simplified control lets you
quickly set and start microwave cooking without the
need to press START/Enter.
Press ddec. 4 times.
The oven begins cooking
and the display shows time
counting down.
NOTE: If you press ddec. , it will add 30
seconds up to 99 min 59 seconds.
Exaple: To set ADD 30 SEC for 2 minutes.
1.
Press Vent Hi/Low/Off.
2.
Press Vent Hi/Low/Off.
TURNTABLE ON/OFF
For best cooking results, leave the turntable on.
It can be turned off for large dishes. Press Turntable
On/Off button to turn the turntable on or off.
NOTES:
1. This option is not available in sensor cook, defrost,
soften and melt modes.
2. Sometimes the turntable can become hot to touch. Be
careful when touching the turntable during and after
cooking.
3. Do not run the oven when empty.
OPERATION
NOTE: Turn the microwave’s vent fan on whenever
you use the oven range cooktop below it.The fan
captures smoke, steam, and odors and also prevents
the heat from the cooktop from damaging microwave
components.
If the microwave is cooking, the vent fan turns on
automatically if the sensors detect too much heat
from the cooktop. This is normal, and is designed
to prevent microwave component damage.
Loading ...
Loading ...
Loading ...