Loading ...
Loading ...
Loading ...
6
INSTALLATION
Installing the Transformer on Grill Base
For Models VBBO5160 / VBBO5260
1. The transformer must be mounted inside the
cabinet
2. If you are installing a Viking grill on either side
of the burner, there is a hole on either side of
the cabinet provided in order to connect the
grill to the side or power burner unit.
3. If you are not are installing a Viking grill on
either side, locate the four holes in the back
panel and feed the AC plug through the hole in
the shelf and out the hole in the rear panel.
4. Line up the holes in the transformer with the
holes in the rear panel.
5. Using the (4) #10-12 screws that were provided,
attach with a drill with a T25 torx bit to secure
the transformer to the rear panel.
6. Feed the connector through the hole above to
connect it to the side or power burner unit.
Rear
panel
power to the
unit
Side
panel
Shelf
(4) #10-12
screws
Transformer
For Models VQBO5420
1. The transformer must be mounted inside the
cabinet
2. Locate the four holes in the back panel and feed
the AC plug through the hole in the shelf and out
the hole in the rear panel.
3. Line up the holes in the transformer with the holes
in the rear panel.
4. Using the (4) #10-12 screws that were provided,
attach with a drill with a T25 torx bit to secure the
transformer to the rear panel.
5. Feed the connector through the hole above to
connect it to the grill
6. If you are installing a Viking side burner or power
burner on either side of the grill, there is a hole
on either side of the cabinet provided to feed the
connector from the grill to the burners.
Power
Supply
Rear
panel
Side
panel
(4) #10-12
screws
Transformer
Power
Supply
Shelf
power to
the unit
Loading ...
Loading ...
Loading ...