Loading ...
Loading ...
Loading ...
NOTE:Toavoidvibrationduringoperation,routethewater
supplylinesothatitdoesnottouchthedishwasherbase,frame
ormotor.
Connectthe3/8"compressionfittingtothewatersupplyline
priortoinstallingtheunitintothecabinetopening.Attachsuch
thatthe3/4"connectionisfacingupwardasshownabove.
Coppertubingonly:Putthetubingintothe90°elbowfittingas
farasitwillgo(thecoppertubingbendsandkinkseasily).Slide
thenutandferruleforwardandstartthenutontotheelbow
threads.
Flexiblebraidedconnection:Securenuttoelbowusing5/8"open
endedwrenchoradjustablewrench.
NOTE:DonotuseTeflon_;ttapewithcompressionfittings.
IMPORTANT: Always use a new drain hose. Check local codes
to determine whether an air gap is required.
t®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.
If needed, drill a 11/2'' (3.8 cm) diameter hole in cabinet wall or
side of the opening closest to the sink.
Route drain hose as shown through hole in cabinet to the front
center of opening where drain connection will be made. Tape
drain hose to the floor in area shown. This will prohibit it from
moving when dishwasher is moved into cabinet opening.
Connect drain hose
mect drain } waste tee or
Waste d!sposer- no air gap
OptiOn B; NO waste disposer, no air gap
Option C,waste disposer _With air gap
tion 3, NOWaste disposer_wkh air gap
IMPORTANT: The drain hose connection of the disposer or a
waste tee must be made before the drain trap and at least
20" (50.8 cm) above the floor where the dishwasher will be
installed.
Helpful Tip: To reduce vibration of the hose, keep the hose away
from the floor.
10
Loading ...
Loading ...
Loading ...