Loading ...
Loading ...
Loading ...
44
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not turned
on). To use these functions, be sure the cable connections are correctly made. For the
connection methods, see the Connection chapter.
Active VGA Out
Selecting On in the POWER MANAGEMENT > Standby Settings > Active VGA Out
outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT sockets are
correctly connected to devices. The projector outputs the signal received only from
COMPUTER IN 1.
Active Audio Out
Selecting On in the POWER MANAGEMENT > Standby Settings > Active Audio Out
outputs an audio signal when the AUDIO IN 1 socket is correctly connected to a proper
device.
LAN Control
Selecting On in the ADVANCED > LAN Control Settings > Standby LAN Control
allows the projector to provide the network function when it is in standby mode. See
"Controlling the projector through a LAN environment" on page 38 for details.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure
you have made a correct connection to the projector audio input/output jacks. See
"Connection" on page 16 for more details.
Adjusting the audio mode
1. Open the OSD menu and go to the BASIC > Audio Settings > Audio Mode menu.
2. Press / to select a preferred audio mode.
If available, you can press Audio Mode on the remote control to select a preferred audio mode.
Muting the sound
1. Open the OSD menu and go to the BASIC > Audio Settings > Mute menu.
2. Press / to select On.
If available, you can press on the remote control to toggle the projector audio between on
and off.
Adjusting the sound level
1. Open the OSD menu and go to the BASIC > Audio Settings > Audio Volume menu.
2. Press / to select a desired sound level.
If available, you can press / on the remote control to adjust the projector’s sound
level.
Loading ...
Loading ...
Loading ...