Loading ...
Loading ...
Loading ...
13
en
Changing presettings
my mode
Manual cooking with individual settings for
the preparation time and temperature.
■ Once the appliance has been switched
on, in function selection mode, button
B and the indicator [мой режим]
(my mode) are permanently lit. Button
G flashes. “00:00” lights up in the
display.
■ Press button F once. “00:00” flashes in
the display.
■ Keep pressing, or press and hold,
button F until the desired preparation
time is displayed.
■ Press button C once. “00c” flashes in the
display.
■ Keep pressing, or press and hold,
button C until the desired preparation
temperature is displayed.
■ Press button G to start or continue
the preparation programme with the
individual values.
■ The appliance heats up the pan until the
target temperature is reached.
■ Once the target temperature is reached,
the lines go out and the preparation time
is shown in the display. The preparation
process starts automatically.
Changing presettings
Depending on the programme, the pre-
configured values for temperature, time or
start time delay can be changed according
to your individual needs.
The values are set by pressing the
applicable button. The values will change
faster if the button is pressed and held
down. Once the maximum value of a setting
has been reached, the display will jump
back to the minimum value.
Setting a start time delay
Depending on the preparation program, the
time until the programme is started can be
set.
■ Select the preparation programme.
■ Press button A. Button G flashes.
A pre-configured value flashes in the
display.
■ Pressing button A increases the time
displayed.
■ Press button G when the desired start
time delay is displayed.
■ The desired start time delay is shown in
the display. [таймер] (timer) lights up in
the display.
■ The time until the start counts down.
The preparation process starts
automatically after this.
Please note:
■ The start time delay can be switched
off at any time by pressing button G.
The preparation programme then starts
immediately.
■ If a pre-configured time does not flash
in the display, a start time delay cannot
be set for the selected preparation
programme.
Setting the preparation
temperature
The temperature can be individually
changed either before or during preparation.
■ Before preparation:
In function selection mode, keep
pressing button D until the desired
preparation programme is selected.
■ Press button C once. The pre-configured
preparation temperature flashes in the
display.
■ During preparation:
Press and hold button C. The current
preparation temperature is briefly shown
on the display.
■ Change the values: Press button C
repeatedly, or press and hold it until
the desired preparation temperature is
reached.
■ Press button G to start or continue
the preparation programme with the
individual values.
Note: If button G is not pressed, the
preparation programme will continue with
the temperature that was previously set.
Loading ...
Loading ...
Loading ...