Loading ...
Loading ...
Loading ...
esatto.house 05
Installation, Safety & Disposal
2
Instructions for Installation
1.Do not tilt the refrigerator for more than 45
0
form upright during moving it. And do not apply
force on any part such as condenser and door to
prevent the refrigerator from deforming, or else
it will influence its performance.
2.Let the refrigerator have enough space to work
well.
3.Don’t install it in high temperature of humidity
place so as to avoid being damaged, dampened
and rusted.
Cautions for Safety
1.Before the refrigerator is plugged in chech in the
electric voltage to be used fit is the same as the
rated voltage. The power plug should have its
independent socket, adapter may cause the
socket overheat.
2.Don’t store inflammable materials such as ether,
benzine, LP gas and glue etc in the refrigerator.
3.Don’t splash water on the refrigerator, it may
arouse malfunction or electric shock.
4.When gas leaks from its container. Don’t pull the
plug out or in. it may arose sparks and fire
calamities.
5.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
3
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
6. Children should be supervised to ensure that
they do not play with the appliance.
7. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a
hazard.
8.Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
9. Do not use mechanical devices or other means
to accelerate the defrosting process, other than
those recommended by the manufacturer.
10.Do not damage the refrigerant circuit.
11. Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
12. Do not store explosive substances such as
aerosol cans with a flammable propellant in this
appliance.
Disposal
1. Old appliances still have some residual value.
An environmentally friendly method of disposal
4
will ensure that valuable raw materials can be
recovered and used again.
2. The refrigerant used in your appliance and
insulation materials require special disposal
procedures. Ensure that none of the pipes on the
back of the appliance are damaged prior to
disposal. Up to date information concerning
options for disposing of your old appliance and
packaging from the new one can be obtained from
your local council office.
Instructions for Use
1.When operating the refrigerator for the first time,
run it without loading any food until it autos
tops at the desired temperature. Usually it takes
2 or 3hours,then set the thermostatic dial at the
setting desired and put foods in the refrigerator.
2.The temperature of the refrigerator can be
adjusted by turning the thermostatic dial. A
medium setting of the thermostatic dial is the
most suitable for general operation.
Loading ...
Loading ...
Loading ...