Loading ...
Loading ...
Loading ...
Fuses and bulbs
Changing the tail light bulbs (on the
r
e
ar lid)
3 Applies to the model: IBIZA ST
Fig. 113 Lights on the boot.
Fig. 114 Removing the bulb holder.
Accessing the rear lid lights
●
Open the rear lid.
●
On the rear lid lining there is a lid behind
e
ac
h light
.
●
Remove the lid with a flat screwdriver, plac-
ing it in notch
A
›
›› Fig. 113
.
Ch
anging bulbs
●
Remove the bulb holder by pressing the
fastening clips
B
›
›› Fig. 114
and p
ulling
outwards.
●
Replace the faulty bulb, rotating it to the
left and outwards.
●
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
Changing the side and interior
bulbs
Turn signals
Fig. 115 Turn signals.
–
Press the turn signal to the left or to the
right
t
o r
emove the bulb.
–
Remove the bulb holder from the turn sig-
nal.
–
Remove the failed bulb and replace with a
new bulb.
–
Insert the bulb holder in the turn signal
guide until it clicks into place.
–
First fit the turn signal in the opening in the
chassis, fastening the tabs
1
›
›
› Fig. 115
,
and then fit in the bulb as shown by the ar-
row
2
›
›
› Fig. 115
.
91
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...