Loading ...
Loading ...
Loading ...
Emergencies
●
R
emo
v
e the bulb holder, separating it from
the casing. To do this, press tabs
B
in the
dir
ection of
the arr
ows ››› Fig. 109.
●
When the bulb holder has been removed,
press in the direction of the arrow
1
and at
the s
ame time, t
urn in the dir
ection of the ar-
row
2
›
›› Fig. 110
Ch
an
ging bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
Changing the tail light bulbs (on the
side panel)
3 Applies to the model: IBIZA ST
Fig. 111 Lights on the side.
Fig. 112 Removing the bulb holder.
Accessing the side light bulbs
●
Open the rear lid.
●
Look for a lid with a grill behind the side
lights.
●
R
emo
v
e the lid with a flat screwdriver, plac-
ing it in notch
A
›
›› Fig. 111
.
Ch
anging bulbs
●
Remove the bulb holder by pressing the
fastening clip
B
›
›› Fig. 112
and p
ulling it
outwards.
●
Replace the faulty bulb, rotating it to the
left and outwards.
●
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
90
Loading ...
Loading ...
Loading ...