Loading ...
Loading ...
Loading ...
10 11
BODYZONE CONTROLLER
D. Detachable controller: dual controllers
for all Double/Queen/King/Super King
models
E. BodyZone heat technology: provides
individual heat settings for both your upper
and lower body for ultimate comfort control
F. LCD screen: illuminates when
programming settings and dims when set
G. 6 heat settings: allows you to choose a
different comfort heat setting for both upper
and lower body
H. Auto-off timer: can be pre-programmed
to turn the blanket off after a set number
of hours
I. Choice of Manual or Auto setting:
a) Manual setting: to select body zone
heat settings and auto-off time
b) Auto setting: Remembers the last heat
and auto-off settings programmed
J. Controller socket attached to the heated
blanket: dual sockets for all Double/
Queen/King/Super King models
K. Controller plug: attaches to the controller
socket and is easy to remove for storing
Functions
BEFORE FIRST USE
Remove any promotional material and
packaging from the heated blanket.
SECURING YOUR FITTED HEATED
BLANKET
Unfold the heated blanket and lay it flat on
the mattress, ensuring that the skirt is aligned
with the corresponding edges. Ensure that the
controller socket(s) is facing up and positioned
at the top end of the mattress.
Ensure that the heating wire section on the
blankets is clear of the pillow and does not
hang over the sides of the mattress.
Pull the elastic inside the fitted skirt over the
ends of the mattress. Ensure to pull the middle
of the blanket so that it is evenly stretched and
distributed over the entire mattress, ensuring
there are no creases or rucking.
NOTE
The heated blanket must not be wider than
the mattress with which it is to be used. It is
normal for a small section of the fitted skirt to
be showing on top of a larger sized mattress.
No heating wire must be trapped or tucked
into any part of the bed. The heating wire
should not hang over the sides of the mattress.
Ensure the elastic of the blanket skirt is
completely under the entire mattress and
secure.
When fitted to the mattress correctly, the
controller socket(s) should be positioned at
the top end of the mattress, near occupants
shoulder area.
NOTE
Ensure that the blankets is stretched
completely flat when placed on the mattress
and creases or rucking is not evident.
CAUTION
No heating wire must be trapped or tucked
into any part of the bed.
Ensure that when the blanket is fitted onto the
mattress the controller(s) and flexible power
supply cord are outside of the bed coverings
and located in a position that will prevent
accidental damage to the housing and cords.
Use this blanket as an under blanket and do
not use above the occupant of the bed.
D
E
J
K
G
I
H
F
Loading ...
Loading ...
Loading ...