Loading ...
Loading ...
Loading ...
Installation
74
Replacing the oven burner nozzle
1. Open the door.
2. Remove all accessories from inside the
oven.
3. Lift up the oven surface and pull it
outwards.
4. Loosen the screws A and B.
5. Move away the lock that secures the
thermocouple and igniter to the burner
with screw A.
6. Take out the burner pulling it outwards
until the nozzle is accessible.
7. Replace the nozzle using a 7 socket
wrench.
Adjusting the minimum setting for natural
or town gas
Light the burner and turn it to the minimum
position. Extract the gas cock knob and turn
the adjustment screw next to the tap rod
(depending on the model) until the correct
minimum flame is achieved.
Refit the knob and verify that the burner
flame is stable. Turn the knob rapidly from
the maximum to the minimum setting: The
flame should not go out. Repeat the
operation on all gas cocks.
Take care not to damage the
thermocouple or the igniter when
doing this.
The tightening torque of the nozzle
must be 4 Nm.
Loading ...
Loading ...
Loading ...