Loading ...
Loading ...
Loading ...
22
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel
wool, abrasive cleansers, or oven cleaner.
To avoid damage, do not soak or immerse knobs in water.
When replacing knobs, make sure knobs are in the O
position.
On some models, do not remove seals under knobs.
Cleaning Method:
■ Soap and water:
Pull knobs straight away from control panel to remove.
Clean with a soft cloth moistened with soap and water.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths, or abrasive
papertowels.
Cleaning Method:
■ Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
onpanel.
■ Kitchen and appliance cleaner (Part number W10355010
may be ordered from sears.com. See the back cover of this
Use and Care Guide for additional contact information.)
OVEN RACKS
Cleaning Method:
■ Steel-wool pad
■ For racks that have discolored and are harder to slide,
alightcoating of vegetable oil applied to the rack guides
willhelp them slide.
STORAGE DRAWER (on some models)
Check that storage drawer is cool and empty before cleaning.
Cleaning Method:
■ Mild detergent
OVEN CAVITY
Use Lo Temp Clean regularly to clean oven spills.
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain. Staining,
etching,pitting, or faint white spots can result.
Do not clean the oven door gasket.
Cleaning Method:
■ Clean cycle:
See “Clean Cycle” section.
Oven Light
The oven light is a standard 40-watt appliance bulb. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the O position.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
A
A. Oven light
Loading ...
Loading ...
Loading ...