Loading ...
Loading ...
Loading ...
English - 8 -
To turn on the TV: Press the middle of the button
in, the TV will turn on.
Notes:
• If you turn the TV off, this cycle starts again
beginning with the volume setting.
• Main menu OSD cannot be displayed via
control buttons.
Operation with the Remote Control
Press Menu button on your remote control to
display main menu screen. Use the directional
buttons to select a menu tab and press OK to
enter. Use the directional buttons again to select
or set an item. Press Return/Back button or
Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press Source button on your remote control
consecutively to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the
volume by using the Volume +/- and Programme
+/- buttons on the remote.
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery
compartment. Insert two size AAA batteries.
Make sure the (+) and (-) signs match (observe
correct polarity). Do not mix old and new
batteries. Replace only with same or equivalent
type. Place the cover back on.
1.
3.
2.
Connect Power
IMPORTANT: The TV set is designed to
operate on a 220-240V AC, 50 Hz supply. After
unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to
the mains. Plug the power cable to the mains
socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the
AERIAL INPUT (ANT) socket or satellite plug to
the SATELLITE INPUT (LNB) socket located on
the back of the TV.
satellite(**)
REAR
OF
THE TV
aerial
or
cable
If you want to connect a device to the TV, make sure
that both the TV and the device are turned off before
making any connection. After the connection is done,
you can turn on the units and use them.
(**) Limited Models Only
License Notication
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc. in the United States
and other countries.
Manufactured under license from Dolby
Laboratories. Dolby Audio and the double-D
symbol are trademarks of Dolby Laboratories.
Dolby Audio™ (supporting Dolby Digital Plus™)
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
TruSurround is a trademark of DTS, Inc.
©
DTS,
Inc. All Rights Reserved.
Loading ...
Loading ...
Loading ...