Loading ...
Loading ...
0027-PM & 0027-PM/CAN
Installation Instructions
1) Using a Closed End Upright, decide how far from the floor to
install the upright.
Note: We recommend measuring 24" from the floor as
shown below and mark your screw locations.
2) Repeat step 1 for the Open Ended Upright and other Closed
End Upright, while being sure to space them at least 8"
between uprights.
Child-Friendly Installation:
3) If installing where studs are present, use a 1/8" drill bit
to pre-drill screw holes.
If installing where studs are not present, use a 1/4" drill bit to
pre-drill the anchor holes. Then insert the provided anchors.
OR
Floor
Floor
Floor
Pre-Drill Holes
24"
8"
8"
24"
Page 3
Loading ...
Loading ...
Loading ...