Loading ...
Loading ...
Loading ...
01 SETTING UP01 SETTING UP
Setting up your refrigerator _35
Cap
12. Separate the Cap of the front
leg Cover. (pull out inside of
Cap)
13. Insert the Cap on the other
side of the front leg Cover.
14. Remove 2 bolts of each hinge
with the 10 mm wrench.
15. Place them in front of each
side.
16. Separate low hinge shaft
by using 5/32” wrench and
disassemble low hinge leg
by turning it colockwise, and
then assemble the low hinge
by turning it over.
Option
17. Reattach the former right
hinge on the left side and the
former left hinge on the right
side by using 2 bolts.
18. Separate stopper by removing
1 screw on the right lower
side of freezer and assemble
the stopper on the left side by
reversing it.
19. The middle hinge for reversing
the door is in the door bin.
20. Change the middle hinges
assembled on the refrigerator
with the middle hinges in the
door bin.
21. Use the black hinge cap of
the middle hinge assembled
at refrigerator. Then place it at
the bottom of the left middle
hinge supplied separately.
- Use the Flat-blade
screwdriver (-).
NW2-FDR_DA68-01868A-26_EN.indd 35 7/3/2019 4:57:21 PM
Loading ...
Loading ...
Loading ...