Loading ...
Loading ...
Loading ...
Operations
English 35
04 Temp.
Press to change the temperature of the current cycle.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons,
or items labeled Tumble Dry Medium.
• Med Low: For heat lower than Medium. Use to dry synthetic or
washable knit fabrics.
• Low: For heat sensitive items labeled Tumble Dry Low or
Tumble Dry Warm.
• Extra Low: Provides the lowest heated drying temperature
possible.
05 Time
Press to adjust the drying time for the Manual Dry cycles. This
is not available with the Sensor Dry cycles because the dryer
determines the drying time by sensing the current moisture level
of the load.
06 Wrinkle Prevent
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent process.
• Press and hold Wrinkle Prevent for 3 seconds to turn off the
alarm. When the alarm is off, the Alarm Off indicator ( ) turns
on.
07 My Cycle
Choose your favorite cycle including the cycle time, temperature,
and dry level. See “My Cycle” for details.
08 Damp Alert
This alert is available all Sensor Dry cycles except for SANITIZE,
ACTIVE WEAR, and WOOL. Available dry levels are Normal, More,
and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the item is 80 % dry. This lets you take
items that you don’t want fully dried or that dry quickly out of
the dryer early while letting others continue to dry.
09 Drum Light
Press to turn on or off the interior lamp. The lamp stays lit for
2 minutes after it has turned on, and then turns off automatically.
10 Adjust Time
You can change the set time in the Manual Dry cycles. To change
the cycle time, press the Adjust Time buttons (- and +) until the
desired time is displayed.
11 Power Press to turn on/turn off the dryer.
DV6850N_DC68-03650D-06_EN.indd 35 2019-08-08 PM 2:59:54
Loading ...
Loading ...
Loading ...