Loading ...
Loading ...
Loading ...
With a cargo position:
1. Pull the strap.
2. Fold the rear seat backrest rearward. The rear
seat backrest first engages in the loading po‐
sition.
3. Pull the strap again.
4. Return the rear seat backrest to the upright
seating position and engage it.
Cargo area partition net
Cargo area partition net, large
When the rear seat backrest is folded down, in‐
stall the large cargo area partition net behind the
front seats.
1.
Fold down the rear seat backrests, refer to
page 213.
2. Open the lids above on the roof frame until
they engage.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
cles until they reach the stop, arrow 1, and
push them forward.
4. Hook the lower three hooks of the cargo area
partition net into the three eyes of the folded
down rear backrest, arrow 2, raising the back‐
rests slightly, if needed.
Make sure that the lower hooks are hooked
into the eyes from behind.
Cargo area partition net, small
With upright rear backrests, install the small
cargo area partition net behind the second row of
seats.
1.
Remove the cargo cover.
2. Insert each of the two top retaining pins of
the cargo area partition net into the recepta‐
Seite 215
Interior equipment
CONTROLS
215
Online Edition for Part no. 01402896498 - X/18
Loading ...
Loading ...
Loading ...