User manual Air Purifier

Product Diagram
① Control Panel
② Air Outlet
③ Dust Sensor
④ Filter
⑤ Power Cord
⑥ Rear Grille
This product should be used only in accordance with the specifications outlined in this User Guide. Usage other than what has been specified here may result in serious injury.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
| Model | TT-AP002 |
| Operating Voltage |
EU / UK: AC 220-240V 50Hz US / CA: AC 120V 60Hz |
| Rated Power | EU / UK: 50W US / CA: 0.5A, 55W |
| Dimensions | 32.5 x 17.2 x 50 cm / 12.8 x 6.8 x 19.7 in |
| Net Weight | 5.7 kg / 201.1 oz |
| CADR |
EU / UK: 220m³/h US / CA: 135cfm |
| Suitable Room Size | 25-30 m2 / 269.1-322.9 ft2 |
Connecting to a power source, all the indicators on the control panel will flash once and a beep sound will be heard. The product is in standby mode now.

Power Button
Press the Power Button to turn on / off the unit.
Fan Speed Button
1. Press the Fan Button to cycle through Turbo/ High /Middle / Low wind modes.
2. Press and hold it for 3 seconds to enter automatic wind mode where all the wind indicators will light up.
Timer Button
Press the Timer Button to set 1h, 2h, 4h, 8h timer and turn the timer off.
Sleep Button
Press the Sleep Button to turn on the sleep mode. In sleep mode, all the indicators except the sleep indicator will turn off. Press twice to turn off the sleep mode.
ION Button
Press the ION Button to activate or turn off the ION mode.
Change Filter Reminder
1. Change the filter when this indicator flashes.
2. Press and hold the ION Button for 3 seconds to reset the unit after Installing of the new filter.
Note:
1.
when the unit is on, the Air Quality indicator will light up to show the current air quality:
|
Air Quality Indicator |
Green |
Orange |
Red |
|
Air Quality |
Good |
Moderate |
Unhealthy |
2. To achieve better purification, make sure to keep the purifier 30 centimeters / 11.8 inches away from walls, furniture and so on and at least 50 centimeters / 19.7 inches away from metals / electrical appliances.
3. In sleep mode, press the Sleep Button once to check the current settings. Press twice to turn off the sleep mode.
4. In automatic wind mode, the unit will adjust the fan speed according to the results read by the dust sensor (dust concentration).

1. Use soft brushes to dust off the filter regularly for better purification. Don’t wash it with water.
2. Replace the filter when the Change Filter Reminder flashes:



Clean the purifier at least once every month with a clean, dry, soft cloth. More frequent cleaning may be required depending on environmental conditions.
Note:
Maintaining the Filters
The True HEPA filter should be cleaned once each month by a vacuum cleaner.
Note:
This product is covered with TaoTronics product and labor warranty for 12 months from the date of its original purchase.
If any problems occur, please contact the TaoTronics Customer Care Centre in your country via the contact information listed in this User Guide.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
WARNING: This product may expose you to one or more chemicals, which is/are known to the State of California to cause cancer, birth defects or other reproductive harm.