Loading ...
Loading ...
Loading ...
At Every Oil Change Interval as Indicated by the Information Display
1
Inspect the front axle and U-joints. Lubricate any grease fittings. Four-wheel drive
vehicles.
Inspect the steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints.
Lubricate any grease fittings.
1
Do not exceed one year or 10,000 mi (16,000 km) between service intervals.
2
Reset the Intelligent Oil-Life Monitor after engine oil and filter changes.
3
Vehicles with dual rear wheels should rotate the front wheels when specified; rear wheels
only if unusual wear is noted.
Other maintenance items
1
Replace the cabin air filter.Every 20,000 mi
(32,000 km)
Replace the engine-mounted and frame-mounted fuel
filters.
Every 30,000 mi
(48,000 km)
Inspect the engine and secondary cooling system coolant
concentration freeze-point protection, additive corrosion
inhibitor strength, coolant level, and hoses. Add coolant
additive if necessary.
Replace the air inlet foam filter.Every 45,000 mi
(72,000 km)
Replace the front wheel bearing grease and grease seal
if using non-sealed bearings. Two-wheel drive vehicles.
Every 60,000 mi
(96,000 km)
Inspect the accessory drive belt or belts.
2
At 90,000 mi (144,000 km)
Change the crankcase ventilation filter element if
equipped. Dual rear wheel and incomplete chassis
configurations only.
Every 100,000 mi
(160,000 km)
Change the engine and secondary cooling system coolant.
3
Change the automatic transmission fluid and filter. Consult
dealer for requirements.
Every 150,000 mi
(240,000 km)
Replace the accessory drive belt or belts if not replaced
within the last 100,000 mi (160,000 km)
Replace the front wheel bearings and seals if using non-
sealed bearings. Two-wheel drive vehicles.
585
Super Duty (TFE) Canada/United States of America, enUSA, Edition date: 201804, First-Printing
Scheduled Maintenance
Loading ...
Loading ...
Loading ...