Loading ...
Loading ...
Loading ...
10 Maintenance and service
10
362
Lamp replacement - headlamps
All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
1.
Lift out the bonnet stop.
2.
Loosen the screw with a Torx tool,
size T30.
3.
Turn the locking pin anticlockwise.
Pull out the locking pin.
4.
Release the headlamp by alternately
tilting and pulling it out.
IMPORTANT
Take care when lifting out the headlamp so
as not to damage any parts.
5.
Press down the catch.
Unplug the connector.
Place the headlight on a soft surface so
as not to scratch the lens.
IMPORTANT
Do not pull the electrical cable, only the
connector.
6. Replace the relevant bulb as instructed.
The headlight must be fitted and the contact
fitted correctly before switching on the lights
or switching key position.
Related information
•
Lamp replacement - general (p. 360)
•
Lamp replacement - location of front
lamps (p. 361)
•
Lamp replacement - cover for main/
dipped beam bulbs (p. 362)
•
Lamps - specifications (p. 367)
Lamp replacement - cover for main/
dipped beam bulbs
Main/dipped beam bulbs are accessed by
releasing the headlamp's larger cover.
1.
Press the hooks together.
Angle out the cover.
2. Replace the relevant bulb as instructed.
Related information
•
Lamp replacement - headlamps (p. 362)
•
Lamp replacement - dipped beam
(p. 363)
•
Lamp replacement - main beam (p. 363)
•
Lamp replacement - extra main beam
(p. 363)
Loading ...
Loading ...
Loading ...