Loading ...
Loading ...
Loading ...
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
119
Trip computer - trip statistics*
Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
Trip statistics
30
.
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
The TUNE knob can be used to change the
scale for each bar between 1 km and 10 km -
the cursor at the far right changes position
between up and down depending on the
scale selected.
Operation
Different settings can be made in the menu
system MY CAR, see MY CAR (p. 108) -
there, find
Trip statistics.
With the "
Reset when vehicle has been off
for minimum 4h" option highlighted, all sta-
tistics are deleted automatically once driving
is complete and the car has been stopped for
4 hours. The journey statistics start again
from zero the next time the engine is started.
•
Reset when vehicle has been off for
minimum 4h - highlight the box by
selecting ENTER and go back out of the
menu by selecting EXIT.
If a new drive cycle begins before 4 hours
have passed, the current period has to be
deleted manually first using the "
Start new
trip" option.
•
Start new trip - ENTER is used to delete
all previous statistics, back out of the
menu by selecting EXIT.
See also information on Eco guide (p. 65).
Related information
•
Trip computer (p. 109)
•
Trip computer - analogue combined
instrument panel (p. 110)
•
Trip computer - digital combined instru-
ment panel (p. 114)
•
Trip computer - supplementary informa-
tion (p. 118)
30
The figure is schematic - layout may vary depending on updated software and market.
Loading ...
Loading ...
Loading ...