Loading ...
Loading ...
Loading ...
en Water softening system/Special salt
10
Selecting language
The language in the display window )2
can be set from p:‹‚, to p:ƒ„. German
p:‹‚ (Deutsch) is the factory setting.
To change the language:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button )" until
the digital display 8 •:‹... is
indicated.
4. Release both buttons.
5. Press programme button # until
the factory set value p:‹‚ is
indicated on the digital display 8.
“German” (Deutsch) is indicated in
the display window )2.
6. Press programme button 3.
Each time the button is pressed, the
set value increases by one level;
when the value of p:ƒ„ has been
reached, the display jumps back
to p:‹‚
7. Press START button )".
The set value is saved.
8. Close the door.
+ Water softening
system/Special salt
Water softening system/Special salt
To ensure good washing results,
the dishwasher requires soft water, i.e.
containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above 1.2 mmol/l must be
softened. The water is softened with
special salt (regeneration
salt) in the water softening
system of the dishwasher.
The setting and therefore the required
amount of salt
depends on the degree of hardness of
your tap water (see table).
Language Setting
Deutsch p:‹‚
English p:‹ƒ
Français p:‹„
Nederlands p:‹…
Italiano p:ܠ
E p:‹‡
Español p:‹ˆ
Português p:‹‰
Svenska p:‹Š
Norsk p:‚‹
Suomi p:‚‚
Dansk p:‚ƒ
Türkçe p:‚„
p:‚…
Polski p:‚†
Češ. p:‚‡
Magyar p:‚ˆ
Croatian p:‚‰
Slovenian p:‚Š
Slowakisch p:ƒ‹
Deutsch p:ƒ‚
Deutsch p:ƒƒ
Deutsch p:ƒ„
Loading ...
Loading ...
Loading ...